Re: Health of Memory changed from red to green. Sensor name: Memory Device 1B...
Few things to try;Clear the IPMI SEL logs iConnect to the ESXi host through SSH.Run this command: localcli hardware ipmi sel clearReset the iDracRun an extended memory test
View ArticleClik here to view.
EVC question
Hello, We have a 3 node cluster where the (blade) hosts have Intel Xeon E5-2630 v4 - Broadwell CPUs We can only now buy blade servers with Skylake processors. I just wanted to check, we will be able to...
View ArticleClik here to view.
Re: EVC question
Yes, looks like you will be able to add the Skylake hosts to the existing Broadwell-EVC cluster - VMware Knowledge Base Please consider marking this answer as "correct" or "helpful" if you think your...
View ArticleRe: EVC question
Yes its supportet and will work. We running a Cluster with IvyBridge, Haswell, Broadwell and new Skylake CPUs. As long as the new CPU doesnt comes with less or a missing CPU feature compared to the old...
View ArticleRe: Health of Memory changed from red to green. Sensor name: Memory Device 1B...
Hi,Thanks for your reply. I ran the command and still have the same 'event', also IDRAC was reset prior to the new motherboard installation, and after the original motherboard installed was...
View ArticleVCenter Appliance VPXD service does not Start with Error
Hi everyone, We recently had to recover the VCenter Appliance from a vmdk, as well as the Platform Services Controller, but whenever I try to stop and start the VPXD service, it comes up with the...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
You may want to restart PSC first and don't restart vCenter appliance unless you verify PSC appliance has come online and all services are started. Then restart vCenter appliance and retry the task you...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
Hi adding to what Vijay said you can check below similar thread which is going on. I see a similar thread going on in community :vcenter service 6.5 stopped and is not starting -->Make sure your...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
Thanks for responding. One thing I forgot to mention is that I had noticed that PSC would refuse connection on port 443 according to the VPXD log file and then when trying to start the services...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
vCenter services are depended on PSC due to SSO architecture. Since its skipping services it means problem reside on PSC itself. Please make sure you make up below services on PSC without any error....
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
GayathriS: I took your recommendation and did find that the date and time were different between servers, so I updated the ntp.conf file and restarted ntp and now they show in sync. I'll try again in a...
View ArticleRe: Health of Memory changed from red to green. Sensor name: Memory Device...
What other events/errors are you seeing? I'd be pushing for the board to be replaced.
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
Here you have the each service description and details : Platform Services Controller Services But as you identified time was not in sync, please make sure the NTP source and sync configuration. That...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
VCenter is still restarting. It's taking an unusually long time. I also notice that the certificates whenever I browse to the name or IP don't show the entire certificate chain and only the device...
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
OK I think I'm a little closer now. in the logs I see that the VCenter appliance now is able to see the PSC, but because the CA is missing from the chain, there are entries that say they don't trust...
View ArticleRe: EVC question
Hello, Noting that it seems supported as per the VMware compatibility guide. So go ahead Please consider marking this answer "CORRECT" or "Helpful" if you think your question have been answered...
View ArticleRe: Health of Memory changed from red to green. Sensor name: Memory Device...
Just that on this system. I'm waiting on a colleague to upgrade to 6.5, the manufacturer have said it is not a system fault, as there are no error logs on IDRAC TRS, so won't come out to change the...
View ArticleRe: Health of Memory changed from red to green. Sensor name: Memory Device...
Tried reinstalling ESXi?
View ArticleClik here to view.
Re: Health of Memory changed from red to green. Sensor name: Memory Device...
Not at this point, waiting for my colleague to update the software
View ArticleRe: VCenter Appliance VPXD service does not Start with Error
How many PSCs are in this environment? Given it's reporting a thumbprint mis-match from the given and expected thumbprints when trying to connect to the SSO VMOMI endpoint, I suspect that you have an...
View Article